Suits lifted vehicles
ISUZU
D-MAX 2019-ON | D-MAX TFS, RG01 4WD
MU-X 2021-ON | MU-X UCS, RJ 4WD
MAZDA
BT-50 2020-ON | BT-50 TF, RG04 4WD
This bolt on kit corrects the geometry of the front axles and reducing CV bind at full droop by lowering the front diff approximately 20mm. This kit requires no modifications to the cross member and allows the original bash plate to be refitted.
Suits Lifted vehicles.
The kit is supplied complete with all required spacers, bolts, washers and nuts.
When lifting a vehicle, the Constant Velocity (CV) joints are put on an increased angle, helping to accelerate the wear on the joint and putting additional stress on the CV boots. The added down travel from adding extended shocks can also cause the joint to exceed the maximum operating angle, which causes the CV joints to bind up and cease to operate.
The SuperPro bolt-on kit corrects the geometry of the front axles and CV's by lowering the front diff approximately 25mm.
Reducing the angles on the CV joints can help get them back into the normal operating range, helping to avoid the expensive replacement costs of CV's.
